Home / Models / System

NPM-TT2 Multi-Function Production System

Odd-form · Tray feeding · Independent placement line

With front and rear tray feeders, the NPM-TT2 can be connected to NPM-DX / D3A / W2 dual-lane machines to form a line with independent placement including tray components. It supports high-speed, high-efficiency placement of odd-form parts across varied production styles.

NPM-TT2 Multi-Function Production System machine Machine photo · SMT line integration
Specifications
PositioningMulti-function system · Odd-form / tray components
Board sizePC: single lane L510×W590, dual L510×W300; M: single L510×W510, dual L510×W260
Max tact18,000 cph (0.20 s/chip)
Placement accuracy±40 μm/chip (Cpk ≥ 1)
Component range0402 chip – L120×W90×T30 or L150×W25×T30; L135×W135×T13 (option)
Max components120 types (4 mm / 8 mm tape width)
Tray configurationFront and rear tray feeders
Line compatibilityConnects directly to NPM-DX / D3A / W2 dual-lane machines
Power · Air3-phase AC200–480V · 2.5 kVA; Min.0.5 MPa · 200 L/min (A.N.R.)
Dimensions · MassW1,300×D2,798×H1,444 mm · 3,090 kg (with 2 tray feeders, varies with options)

Figures adapted from public Panasonic Connect product information; subject to the official datasheet and contract.

Key functions & features

High-speed odd-form placement
High-speed, high-efficiency placement of odd-form components across diverse production styles.
Independent dual placement
Dual placement for a fully independent line, including tray-fed components.
APC-5M control
Five-factor control for good-unit production and stable operation.
Automation & labor saving
Auto Setting Feeder and related functions reduce manual work and skill dependency.

Advantages in detail

01Independent line with the main line

With front and rear tray feeders, the NPM-TT2 connects to NPM-DX / D3A / W2 dual-lane machines for independent placement including tray components, raising overall line productivity.

02Quality & O.E.E

A built-in LCR detector prevents wrong-component faults; APC-5M (optional) monitors units and controls 5M deviation for predictive maintenance. APC works with inspection machines to control placement deviation.

03Less dependence on skill

Remote operation resolves errors efficiently; AOI alarms show image-based information on the target machine.

SOLUTIONS

Efficient placement of odd-form components and tray feeding

The NPM-TT2 targets odd-form components and diverse production formats, raising overall productivity with tray feeding and independent dual-lane placement, and enabling stable operation through APC engineering control and labour-saving functions. The solutions below are adapted from public information on Panasonic Connect.

01 · Odd-form components & tray feeding

Wide component range and flexible feeding configuration

Supports high-speed, efficient placement of odd-form components, covering everything from 0402 chips to large components. Front and rear tray feeders connect to NPM-DX / D3A / W2 dual-lane machines for fully independent placement including tray components.

Component range & takt

Max takt 18,000 cph (0.20 s/chip), accuracy ±40 μm (Cpk ≥ 1), up to 120 component types — balancing odd-form flexibility with line efficiency.

Feeding configuration

Multiple feeding units can be combined flexibly and supported by automation such as the Auto Setting Feeder to meet different placement floors.

NPM-TT2 component range and max takt
Component range and max takt (original chart)
NPM-TT2 max takt and placement accuracy
Takt and accuracy (original chart)
NPM-TT2 feeding configuration
Feeding configuration (original chart)
02 · APC-5M (Optional)

Optimize maintenance through unit status monitoring and analysis

Software autonomously controls deviation across the 5M factors, while unit status monitoring and simple analysis enable more accurate and faster maintenance.

Predict problems before downtime

Monitor every unit in real time and control 5M deviation, detecting potential problems before deterioration for maintenance ahead of time.

Line-wide visibility

Whole-line status is shown on the LPC (Line Process Controller) screen. Individual units can be reviewed chronologically and post-maintenance status checked to verify the effect.

5M: huMan, Machine, Material, Method and Measurement.

APC-5M unit status monitoring and alert mechanism
Unit monitoring: abnormal / warning / normal alerts
APC-5M unit analysis screen
Unit analysis screen
APC-5M system screen example
LPC system screen example
03 · APC system & labor saving

Control deviation and reduce dependence on skill

The APC system (APC-FF / APC-MFB2) works with inspection machines to control deviation in solder printing and component placement.

Remote operation & AOI information display

Errors can be resolved remotely away from the line. When AOI raises a quality alarm, the target machine displays image-based information for a skill-free response, improving availability and reducing labour.

APC-FF and APC-MFB2 deviation feedback flow
APC-FF printing feedback / APC-MFB2 placement feedback

Typical applications

Source note:Features, advantages and specifications on this page are adapted from public product information on Panasonic Connect. We are an independent supplier and line integrator, not an official Panasonic site. Configuration, output and acceptance criteria are subject to the official datasheet and contract.