Home / Models / System

NPM-D3A Multi-Function Production System

High-speed placement · Dual/single lane · High-volume main line

Built around the V3A nozzle head, a multi-function recognition camera and a high-rigidity frame, the NPM-D3A raises area productivity while delivering high-speed, high-accuracy placement. Dual heads and a 17-station cart plus tray feeder cover a wide component range.

NPM-D3A Multi-Function Production System machine Machine photo · SMT line integration
Specifications
PositioningMulti-function system · High-speed dual/single lane
Board sizeDual lane L50×W50–L510×W300; single lane L50×W50–L510×W590
Max tact46,000 cph (0.078 s/chip); 38,000 cph (0.095 s/chip)
Placement accuracy±37 μm/chip; ±30 μm/chip (Cpk ≥ 1)
Component range0402 chip – L100×W90×T28
Max components68 types (4 mm / 8 mm tape width)
PlacementDual heads, fully independent dual placement
Feeding17-station cart combined with tray feeder
Power · Air3-phase AC200–480V · 2.7 kVA; 0.5 MPa · 100 L/min (A.N.R.)
Dimensions · MassW832×D2,652×H1,444 mm · 1,900 kg (standard config, varies with options)

Figures adapted from public Panasonic Connect product information; subject to the official datasheet and contract.

Key functions & features

Fully independent dual placement
Dual-head structure enables fully independent dual placement, raising line flexibility and output.
High speed & accuracy
The V3A head, multi-function recognition camera and high-rigidity frame improve area productivity, speed and accuracy together.
APC-5M control
Five-factor control (Man, Machine, Material, Method, Measurement) for good-unit production and stable operation, with deviation control and predictive maintenance.
Automation & labor saving
Auto Setting Feeder automates tape feeding, reducing material preparation and dependence on skilled operators.

Advantages in detail

01High-quality placement

A built-in LCR detector checks electrical characteristics to prevent placement faults caused by wrong components. The component is held in place with an adhesive material and measured with a metal rod, enabling high-accuracy inspection regardless of nozzle.

02Maximum O.E.E

APC-5M (optional) monitors each unit in real time, controls 5M deviation and predicts deterioration before it causes a stop. The entire line can be displayed on the LPC screen and analysed chronologically.

APC works with inspection machines: APC-FF feeds solder position data from print inspection back to the placer; APC-MFB2 feeds AOI-measured component positions back to maintain quality.

03Less dependence on skill

Remote operation resolves errors away from the line so operators can focus on feeding. When AOI raises a quality alarm, the target machine displays image-based information for a skill-free response.

SOLUTIONS

High-speed, high-accuracy placement and stable production

The NPM-D3A uses the V3A nozzle head, multi-function recognition camera and high-rigidity frame for high-speed, high-accuracy placement, with APC engineering control and labour-saving functions for good-unit, stable operation. The solutions below are adapted from public information on Panasonic Connect.

01 · High-speed, high-accuracy placement

Upgraded basic performance for both speed and accuracy

The V3A nozzle head, multi-function recognition camera and high-rigidity frame raise area productivity while delivering high-speed, high-accuracy placement. Fully independent dual placement further raises line flexibility.

Component range & takt

Max takt 46,000 cph (0.078 s/chip) and 38,000 cph (0.095 s/chip), accuracy ±37 / ±30 μm (Cpk ≥ 1), handling 0402 chips up to L100×W90×T28 components.

Feeding configuration

Dual placement heads with a feeding section combinable with 17-station carts and tray feeders for diverse components, up to 68 component types.

NPM-D3A component range and max takt
Component range and max takt (original chart)
NPM-D3A max takt and placement accuracy
Takt and accuracy (original chart)
NPM-D3A supported board sizes
Supported board sizes (original image)
02 · Minimising loss, maximising O.E.E (Solutions-02)

APC engineering control: status monitoring & deviation control

Minimise the various losses on the production floor and improve O.E.E. APC-5M (optional) autonomously controls 5M deviation while monitoring unit status and performing simple analysis for more accurate, faster maintenance.

Predict problems before downtime

Monitor every unit in real time and maintain ahead of deterioration. Whole-line status is shown on the LPC (Line Process Controller) screen, analysed chronologically and reviewed after maintenance.

APC system: interlocked deviation control

APC-FF feeds solder position data from print inspection back to the placer; APC-MFB2 feeds AOI-measured component positions back after placement, together securing placement quality.

5M: huMan, Machine, Material, Method and Measurement.

APC-5M unit status monitoring and alert mechanism
Unit monitoring: abnormal / warning / normal alerts
APC-5M unit analysis screen
Unit analysis screen
APC-FF and APC-MFB2 deviation feedback flow
APC deviation feedback flow
03 · Quality & labor saving (Solutions-01 / 03)

Prevent wrong-component faults and reduce skill dependence

A built-in LCR detector checks electrical characteristics to prevent placement faults from wrong components. The part is held with adhesive material and measured with a metal rod for high-accuracy inspection regardless of nozzle.

Remote operation

Errors can be resolved remotely away from the line, avoiding delays and letting operators focus on feeding to raise productivity and reduce labour.

AOI information display

When AOI raises a quality alarm, the target machine displays image-based information for a skill-free response and higher availability.

NPM-D3A component feeding section
Component feeding section (original image)
NPM-D3A feeding configuration
Feeding configuration (original image)

Typical applications

Source note:Features, advantages and specifications on this page are adapted from public product information on Panasonic Connect. We are an independent supplier and line integrator, not an official Panasonic site. Configuration, output and acceptance criteria are subject to the official datasheet and contract.